Well, I got sucked into puitting plug wires into a '94 Z28 that has a LT1 motor, same as Vette? What a bitch, especially the right side. if anyone that has done this before has some tips I would sure appreciate it, it is hard getting past the 4th spark plug.LOL
There is no substitute for cubic inches, except for cubic centimeters!
For what it is worth, I removed the exaust down pipes and that made it much easier. Unfortunately when I was done I had the same misfire/crackling noise problem. Turns out it was the coil wire going bad and coming off the coil tower. DOH!
There is no substitute for cubic inches, except for cubic centimeters!